Chimney cap installation in Dallas
Chimney Cap Installation and Replacement in Dallas, Sized to Your Flue
Standard, custom and lock-top caps measured on the roof and fitted the same visit when in stock.
$499 - $1,100Chimney Cap Installation in Dallas: Typical price
Browse our custom cap catalog
Flip through our custom chimney caps and shrouds, including flat-top and hip-roof caps, a bottom pan cap with spark arrestor, a T-Top style, and the Stevenson, Fortress and Aspen shrouds, with 31 finish colors to choose from. Pick the style and color you like, and we will measure your flue and confirm what fits. The catalog does not list prices, so see the pricing below for installed costs.
Loading catalog... open the PDF
What a Chimney Cap Actually Does for Your Home
A chimney cap is the metal hood and mesh that sits on top of your flue. It looks like a small part, but it is the first line of defense for everything below it.
A good cap does four jobs at once. It keeps rain from pouring straight down the flue, where it rusts dampers, soaks the smoke chamber and stains the firebox. It keeps birds, squirrels and raccoons from nesting in the flue. Its mesh works as a spark arrestor, stopping embers from landing on your roof or your neighbor’s. And its hood helps stop downdrafts on windy days, so smoke goes up instead of back into the room.
Without a cap, an open flue collects leaves, nests and water every season. Most of the animal removals and many of the leak calls we run in Dallas start with a missing or broken cap. If an animal is already inside, see our bird nest and animal removal service first.

How Chimney Cap Installation Works, Start to Finish

Measure and Inspect
We start on the roof, not in the living room.
The technician measures every flue opening, checks the crown, the flue tile and the condition of any existing cap, and looks for signs of animals or water already inside the flue. Mesh size is matched to how you use the fireplace.
You get the cap size, the options that fit your chimney and a fixed price before any work starts.
Install and Secure
Old or damaged hardware is removed first.
A standard cap is fitted to the flue tile and fastened with stainless hardware long enough to bite properly, or with clamp-style mounts on taller chimneys that take the full force of spring storms. Where the old cap was caulked to the tile, the old caulk is cleaned off and fresh high-temperature sealant is applied.
Custom and multi-flue caps are measured on the first visit, fabricated to the exact size of your crown and installed on a return visit. Lock-top dampers are installed with the cable run down to the firebox and tested from inside.
Check the Draft
Before the crew leaves, the cap gets a final check.
The hood is tight, the mesh is clear and the fireplace drafts properly with the damper open. We photograph the finished cap from the roof so you can see exactly what was installed.
Chimney Cap Prices in Dallas
Most standard caps are installed for $499 to $1,100 depending on the flue size and material. Custom and lock-top caps cost more because they are built for your chimney.
| Service | Typical price |
|---|---|
| Standard chimney cap, install or replaceSingle flue, stainless steel | $499 - $1,100 |
| Custom chimney cap, fabricated and installedMulti-flue or non-standard crowns | $1,399 - $2,896 |
| Cap with top-sealing damper (lock-top)Cap and damper in one | $1,300 - $1,509 |
| Cap reassembly, restoration or customer-provided capWe install or re-secure your cap | $190 - $582 |
| Spark arrestor installation | $219 - $329 |
| Screen mesh around cap or spark arrestor | $730 - $1,387 |
| Cap caulkingRe-sealing a loose cap | $240 - $489 |
| Chimney safety inspection (structure, cap, flashing, brick and siding)Waived when you book the repair | $79 |
Your exact price is confirmed on site before any work starts. The $79 safety inspection is waived when you book the repair.
Chimney Cap Installation Questions
How much does a chimney cap cost in Dallas?
A standard stainless steel cap for a single flue runs $499 to $1,100 installed. Custom caps for multi-flue or oversized chimneys run $1,399 to $2,896. We confirm the exact price on site after measuring.
Do I really need a chimney cap?
Yes. An uncapped flue lets in rain, animals and debris, and lets embers escape onto the roof. Most animal removals and many leak calls we see start with a missing cap.
Stainless steel or galvanized?
Stainless steel. Galvanized caps cost less but usually rust within a few years in Texas weather and stain the brick. Stainless lasts far longer.
What mesh size should my chimney cap have?
Mesh size is the detail most people never think about. Standard caps use a 3/4 inch mesh that keeps out birds and most animals while still letting soot pass. Finer mesh catches more embers but clogs faster on wood-burning fireplaces, so we match the mesh to how you actually use the fireplace. Gas log fireplaces and wood fireplaces burned every winter weekend do not need the same cap.
How do you keep a cap from blowing off in a storm?
Wind is the other Dallas factor. Our spring storms regularly bring gusts that will lift a cap held on by a few short screws, especially on taller two-story chimneys. We fasten caps with stainless hardware long enough to bite into the flue tile or use clamp-style mounts, and we check that the hood sits low enough to stop sideways rain without restricting the draft.
Can you install a cap I already bought?
Yes. We install customer-provided caps and can restore or re-secure an existing cap that is still in good shape.
How long does installation take?
A standard cap is usually installed in under an hour once we are on the roof. Custom caps are measured first and installed when fabrication is complete.
Will a new cap stop my chimney leak?
It stops rain entering the flue. If water is coming through a cracked crown, the brick or the flashing, those need to be fixed too. We check all of them during the visit.
Do caps cause draft problems?
A correctly sized cap with the right mesh does not. Undersized hoods and clogged fine mesh can, which is why we size the cap to the flue and the way you use the fireplace.
How often should a chimney cap be replaced?
A stainless steel cap usually lasts many years. Galvanized caps often need replacing within a few years in Texas. We check yours at every inspection.
Can you install a cap on a prefab chimney?
Factory-built fireplaces use caps made for that specific pipe. We replace those too and check the chase cover at the same time.
Service area
Areas We Serve for Chimney Cap Installation
The Chimney Inspection & Sweep serves Dallas and the full DFW Metroplex for chimney cap installation.
We work across Dallas, Plano, Carrollton, Irving, McKinney, Frisco, Allen, Garland, Richardson, Addison, Arlington, and all surrounding communities. If you're in the DFW area, we can get a crew to you.
Schedule Your Dallas Chimney Cap Installation
We measure on site and tell you exactly which cap fits your chimney before anything is installed.
Call us at 972-884-5553 or email info@theonechimneysweep.com to schedule. With 12 active crews and 24/7 availability, we can typically get to you within days, not weeks. We've been serving Dallas-area homeowners since 1991. You can also book online.