Chimney Rebuild and Masonry Restoration in Dallas, Matched to Your Brick

From repointing worn mortar to rebuilding the top courses or the whole chimney, matched to your brick.

Chimney Rebuild in Dallas: Typical price $4,875 – $16,321

Name

Phone

Service

Message

When a Chimney Needs More Than a Repair

Most chimney masonry problems start small: a few open mortar joints, a cracked crown, some spalled bricks near the top. Caught early, those are brick repairs and a day of work.

Left alone, water does the rest. It washes out the mortar, freezes in cracks on the coldest nights, and pushes bricks loose. The top of the chimney goes first because it takes the most weather. Eventually the chimney leans, bricks fall, or the inside of the chimney becomes unsafe to use.

A rebuild replaces the damaged masonry instead of patching it. That can mean the top two to four courses, everything above the roof line, or, in the worst cases, the full chimney down to a solid base.

Signs Your Chimney May Need Rebuilding

The chimney leans or has pulled away from the house
Loose or missing bricks at the top
Mortar joints you can scrape out with a key
Large cracks running through brick, not just mortar
Brick faces that have flaked off across much of the chimney
Repeated leaks that keep coming back after patching

A leaning chimney is urgent. It can be a sign of foundation movement, which is common with North Texas clay soil, and it can put loads on the roof the chimney was never meant to carry.

North Texas clay soil expands when it is wet and shrinks in drought, and tall masonry chimneys feel that movement. Small cracks that open and close with the seasons let water in, and over the years that water does the damage that leads to a rebuild.

What We Find on Dallas-Area Masonry Calls

The most common job is a top-course rebuild. The first few rows of brick below the crown take the worst of the rain and sun, and by the time a crown has failed, those courses are usually loose. We take them down, rebuild with matched brick and fresh mortar, and pour a new crown.

Second is tuckpointing: grinding out worn mortar and packing new mortar into the joints. Done in time, it adds many years to a chimney without touching the bricks.

Full rebuilds are less common and always confirmed on site. When a chimney is unsafe, damaged from top to bottom, or no longer needed, we can also take it down completely and close up the roof.

Matching matters for resale. A rebuilt chimney with mismatched brick stands out from the street, so we bring brick samples, compare color and texture in daylight, and tint the mortar to match the existing joints as closely as possible.

Tuckpointing, Top Course Rebuilds and Full Rebuilds

Tuckpointing and repointing: worn mortar is ground out and replaced with new mortar matched in color, restoring the joints that hold the chimney together.

Top brick courses rebuild: the top two to four courses rebuilt, usually with a new crown and cap. See our crown rebuild page.

Chimney case brick: damaged sections of the brick casing demolished and rebuilt.

Masonry wall reinforcement: strengthening for chimneys that have moved.

Full rebuild or demolition: the chimney rebuilt from a sound base, or removed and the roof closed up.

Most rebuilds include the parts that keep water out afterwards: a properly poured crown with an overhang, new flashing, a stainless cap and a breathable water repellent. Rebuilding the brick without them only resets the clock.

Permits, scaffolding and roof protection are planned before the first brick comes down, and the area around the house is cleaned up at the end of every day.

How Chimney Rebuild Works, Start to Finish

Assess the Structure

We decide repair or rebuild on site, never from a phone call.

The technician inspects the masonry from the roof and, where possible, from the attic. We check for lean, separation from the house, spalled and cracked brick, failed mortar and a damaged crown, and we look at how far down the damage goes.

You get a clear scope, from repointing to rebuilding the top courses to a full rebuild, with photos and a fixed price.

Rebuild and Match

Damaged masonry is taken down to sound brick.

The chimney is rebuilt course by course with brick and mortar matched as closely as possible to the original, so the repair blends with the rest of the house. Flue tiles are reset or replaced as the rebuild goes up.

A new crown is formed with the correct overhang and slope, new flashing is installed where the chimney meets the roof, and a cap goes on top so the new work is protected from the first storm.

Seal and Finish

Before the crew leaves, the new work is finished properly.

The masonry is cleaned of mortar residue and waterproofed. We show you photos of every stage and the finished chimney.

Pricing

Chimney Rebuild and Masonry Prices in Dallas

Tuckpointing starts at $700. Rebuilds are priced by how much masonry is replaced, from the top courses to the full chimney.

Call 972-884-5553 Book online

Service	Typical price
Tuckpointing / repointing mortar	$700 – $3,957
Top brick courses rebuild (2 to 4 courses)	$2,892 – $7,055
Chimney case brick (demo and new)	$690 – $3,600
Masonry wall reinforcement	$3,129
Chimney rebuildPartial or full, confirmed on site	$4,875 – $16,321
Chimney demolition	$2,241 – $14,353
Chimney safety inspection (structure, cap, flashing, brick and siding)Waived when you book the repair	$79

Your exact price is confirmed on site before any work starts. The $79 safety inspection is waived when you book the repair.

FAQ

Chimney Rebuild Questions

How much does it cost to rebuild a chimney in Dallas?

Rebuilding the top two to four courses typically runs $2,892 to $7,055. Larger rebuilds run $4,875 to $16,321 depending on how much of the chimney is replaced.

Can my chimney be repaired instead of rebuilt?

Often, yes. Tuckpointing and brick repair fix many chimneys. A rebuild is only needed when bricks are loose or the structure has moved.

What is tuckpointing?

Grinding out worn mortar and replacing it with new mortar. It restores the joints without replacing the bricks.

Is a leaning chimney dangerous?

It can be. A leaning chimney should be assessed quickly, because it can pull away from the house or put loads on the roof.

Will the new brick match?

We match brick and mortar color as closely as possible to your existing chimney.

Can you remove a chimney I no longer use?

Yes. We demolish chimneys and close up the roof.

How long does a chimney rebuild take?

A top-course rebuild usually takes one to two days. Larger rebuilds take longer and are scheduled around the weather.

Does a rebuild include a new crown?

Top-course and full rebuilds usually include a new crown, because the old crown sits on the bricks being replaced.

Can foundation movement damage my chimney?

Yes. Soil movement is a common cause of cracks and leaning in North Texas chimneys.

Areas We Serve for Chimney Rebuilds

The Chimney Inspection & Sweep serves Dallas and the full DFW Metroplex for chimney rebuild.

We work across Dallas, Plano, Carrollton, Irving, McKinney, Frisco, Allen, Garland, Richardson, Addison, Arlington, and all surrounding communities. If you’re in the DFW area, we can get a crew to you.

Schedule Your Dallas Chimney Masonry Assessment

We confirm the full scope on site, so you know exactly what the rebuild includes before any brick comes down.

Call us at 972-884-5553 or email info@theonechimneysweep.com to schedule. With 12 active crews and 24/7 availability, we can typically get to you within days, not weeks. We’ve been serving Dallas-area homeowners since 1991. You can also book online.